Marie 5

All of our car seat fabrics are machine washable at 30°. Please refer to the user manual or the washing tag for the correct care instructions. We do not recommend drying any fabric items in a tumble dryer as this could cause the fabric to shrink.

HOW TO REMOVE THE FABRICS FOR WASHING

1. If in use, remove the newborn pillow and open the back pocket to remove the padding.
2. Remove the crotch strap from the fabric and the four harness covers by simply opening them.
3. Now the best part…Loosen the whole cover by simply lifting it from the edges. Pay attention to the side impact buddy socket and the recline trigger. Remove the covers by simply pulling it up. Ta-daaaaa! Simple, right?

HOW TO REPOSITION THE FABRICS

Find the fabric installation tool under the left side behind the headrest. Tuck the fabric edge into the right position. Put the covers back the same way they were. You can follow the previous steps in reverse order to make sure everything is in place.

WASHING INSTRUCTIONS

Hand-wash recommended (max. 30°C). Use mild detergents. Do not iron, dry clean, bleach, or tumble dry. Keep away from pets and direct heat. Do not use bleach, abrasive, upholstery, or aggressive cleaning agents. Clean the plastic parts and the integrated harness system with mild detergent and warm water. Do not use lubricants. The fabric covers are a safety feature, and the child seat should never be used without them.

Marie’s headrest can be adjusted into 11 positions to fit the needs of your growing child. To adjust the headrest position while your baby is in the child seat:

1. Pull the headrest strap adjuster.
2. Move the headrest, then slide it upward or downward. Adjust the headrest until the Eye Level Indicator matches the eye level of your baby. Pay attention to the harness position when adjusting the headrest.

Notice: Marie’s headrest contains magnets that can influence electronic apparatus such as pacemakers.

Keep an eye on the “Eye Level Indicator” (pun intended). Adjust the headrest until the Eye Level Indicator matches the eye level of your baby. This simple visual guide will help you position the headrest for the highest level of safety and comfort.

Marie has a unique 360° rotation, enabling you to comfortably face your child when placing it into or removing it from the seat. Follow these instructions to rotate your car seat:

1. Slide the top safety lock and then push the rotation button.
2. Rotate Marie to your preferred position.
3. After the child is in the car seat and the harness secured, rotate the seat back in place until you hear a "click“.
4. Check that the seat is locked correctly and that the safety indicator is green.

Follow these instructions to install Marie in your car correctly.

1. If needed, place the two ISOFIX guides on both ISOFIX anchor points between the seat and the seatback. Fold-out the support leg.
2. Extend the ISOFIX connectors by pulling the ISOFIX connector, sliding it to the end.
3. Insert both connectors into the ISOFIX anchor points until you hear a “Click”.
4. Check that the ISOFIX safety indicators have turned green on both sides.
5. Place both hands on the child seat and push it against the vehicle firmly. Note: Avoid the use of excessive force when installing Marie in your car. Extreme pressure could create internal damages invisible to the naked eye.
6. Push the support leg’s adjustment button and slide the leg downwards until it reaches the floor of the vehicle. Push the leg firmly on the ground until the indicators turn green.

Warning: Do not use this child seat with the vehicle seat belt.